Our company manufactures and markets over 40 brands in India.
Below you can find out more about our products.
GEECO Pumps
V4 SUBMERSIBLE PUMPSET
Bore Well submersible pumps for 100mm (4”) bore wells. High performance. Rigid construction. Suitable for discharge range 30 LPM to 500 LPM and Delivery head up 1330 feet. High head applications for narrow 4” bore holes
FEATURES
- High Rigid construction. Suitable for low discharge and High head applications from narrow 4” bore holes.
- Fitted with Tilting pad floating carbon thrust bearings for Low Friction and high thrust loads.
- Stainless steel Body for Anti corrosive and rust proof long life
- S₁ Duty cycle for continuous operation
- Re woundable Stator windings
- Windings designed to withstand wide voltage fluctuations
- Carbon bearings for long trouble fee performance
- Pumps for deep holes 400 feet and above ( TUFF model ) specially designed to arrest whirling effect.
- Dynamically balanced rotor and hydraulically balanced impellers increases the durability of the pump
- Light weight enables the pumps connected to UPC or HDPE pipes.
APPLICATIONS
- Can be used to pump water from 4” (100mm) or higher sized bore wells.
- Most suitable for low discharge and deep bore wells.Light weight
- Minimum power of 0.5hp to depth up to 180 feet makes even a small family to have their own water source.
- Single phase 230 Volt pump can be used to pump water from a depth of 770 feet .
FEATURES
- Head up to 170 feet depth
- Discharge up to 100 LPM
- Factory assembled and coupled motor and pumps makes installation easy.
- High starting torque and works without starting capacitor
- Factory filled coolant water with special additive to cool the winding and lubricate the bearings
- Saves 60% power compared to Jet pump
- SS 304 grade Motor and pump Body.
- Noise less silent operation
- Saves Floor space occupied by a jet pump
APPLICATIONS
- Suitable pumping water from 4” bore wells and shallow wells
- Small building and gardens
- Can replace Conventional Jet pumps
LITTLE SUBMERSIBLE PUMPSET
A cute , multi utility submersible pump. Designed for DIY (Do it yourself) concept. Pre assembled, pre coolant filled pump makes the pumps easy for installation.
Just join a hose along with a nylon rope,join required length of cable and install it without ny installing gear like chain pulley block, tripod & Etc.
FEATURES
- First of its kind in India
- Totally capsuled construction. No seals, leakages.
- Suction pipe can be connected when pumping from filter point bore wells and in well bore wells.
- Noise free operation
- Carbon graphite resin impregnated radial bearings for long bearing life
- High quality precision ground stainless shaft for long bearing life
- No gland packing, Mechanical seals to maintain
- Rigid construction.
- No foundation, Base plate, foundation bolts require
APPLICATIONS
- Agricultural Irrigation
- Industrial Water pumping systems
- Strom water / Dewatering drainage pump
- In firefighting systems
- As a flame proof Pump
- Riverside water pumping
- Can be used as a regular pump with suction pipe and foot valve and as a submersible pump with strainer in the suction flange
AMPHIBIAN PUMP
As its name denotes, this pump can work inside and outside water. Pumpedwater is circulated inside to lubricate and cool the heating parts.
Thus noexternal cooling is required. Most suitable for river side irrigation, firefighting, flame proof applications, filter point Bore wells, in places where water level varies frequently.
HORIZONTAL OPEN WELL
SUBMERSIBLE PUMP
Surface Mono block pumps were used to pump water from wells, need frequent maintenance like bearing lubrication, Foot valve maintenance, and shifting according to water level changes. Their windings and bearing tend to fail if well water enter inside. These open well submersible pumps eliminates all the above said maintenance troubles and give a better performance.
FEATURES
- Withstands Wide voltage fluctuations (250 to 450 Vols)
- Special Journal bearings and Thrust bearings give trouble free performance
- Stainless steel shaft
- Option of Stain less steel and treated steel body
- No need of Foot valve or priming of pump
- Noise less operation
- No pump room required. You save the space
APPLICATIONS
- Agricultural irrigation
- Industrial water supply
- Residential buildings
- Water supply schemes
VERTICAL OPENWELL
Vertical multi stage pump mounted above heavy duty motor with suitable thrust bearings to counter the pump operating thrust load.
FEATURES
- Vertical construction for increased bearing life
- Full stainless steel shaft for corrosion free long life
- Mono shaft design for trouble free noise less operation
- Copper Cage rotor for high efficiency and long life
- No suction & priming problem
- No need of Pump House
- Standardized parts. Easily serviceable
APPLICATIONS
- Agriculture irrigation
- Commercial building service
- Public Water supply schemes
- Industrial water supply
- Rural water supply
FEATURES
- 2 Pole (2900RPM) Compact Motor
- Brass forged impellers for rust free long life
- Flange type Suction and delivery for easy maintenance
- Wide voltage range 140 to 250 Volts
- Very low power consumption
- 2 Pole CSCR Motor for trouble free service
- Very low noise levels
- Aluminium powder coated motor body
APPLICATIONS
- Domestic water supply
- Garden irrigation
- Pressure booting application
- Small buildings
- Small Cooling tower applications
SELF PRIMING PUMPS
Light weight, portable, superior performance self priming pumps.
Available in Four models – LITTLE KING , LITTLE KING PLUS, SMART & HERO Every model has its own unique features with inbuilt Thermal protector.
DEWATERING PUMPS
Dewatering waste water, Rain water, storm water & sewage water in building basements, Hotels , construction sites , In water recycling applications to pumps out slushy water with semi solids and fibrous water The pump can run submerged and partly submerged to drain out waster water to maximum.
FEATURES
- Class B insulated motors with dry type windings
- Fitted with Auto reset thermal relay to avoid over heating
- Non clog impellers for pumping semi solids and fibrous suspended liquids
- Fitted with Float switch to start the pump automatically when the water level raises
- Fitted with auto rest thermal overload protector
- Maintenance free pre lubricated sealed bearings
APPLICATIONS
- Dewatering rain water in low level areas
- In hotels to pump out waste water
- In STP plants
- In building sites to pump seepage water
- In removing sewerage , septic tank contents
- In low level buildings to pump out storm water